Notes:
If the device is behind SOHO (Small Office Home Office) router with port forwarding configured for
remote access, static IP should be used to avoid IP address changes after router reboot.
TCP port above 5000 is suggested to Port forward HTTP for remote access, due to some ISP would
block port 80 for inbound traffic. For example, change the default HTTP port from 80 to 8088, to
make sure the TCP port will not be blocked.
In addition to HTTP port, RTSP port is also required to configure via port forwarding, so that the
remote party can view the video stream.
Access Settings
This page configures the GSC3620 access control parameters.
Web Access Mode
Web Access Port
Figure 15: Access Settings Page
Table 7: Access Settings
Selects the access mode to the Web GUI either HTTP or HTTPS.
Specifies the TCP port for Web Access, default 443.
GSC362X Series User Manual
Version 1.0.5.3
P a g e
|
28