Table of Contents
Advertisement
Forces the GSC3620 to use random ports for both SIP and RTP messages. This
is usually necessary when multiple units are behind the same full cone NAT. The
Use Random Port
default setting is "Disabled"
Note: This parameter must be set to "Disabled" for Direct IP Calling to work.
Configures the auto on-hook timer (in seconds) for automatic disconnecting the
Auto On-Hook
SIP call. Default setting is 300. Range between 0~65535.
Timer
Specifies the Ring timeout, when no reply is returned from the called party after
exceeding this field, the GSC3620 will hang up the call. The value is in the range
Ring Timeout(s)
of 0s – 90s. By default, it is "30" seconds.
SIP TLS
Input the TLS certificate here for encryption.
Certificate
SIP TLS Private
Input private key here for TLS security protection.
Key
SIP TLS Private
Specifies the password for SIP TLS private Key.
Key Password
Accepts peer-to-peer IP call (over UDP only) without SIP server. Default is
Enable Direct IP
Call
"Enabled".
Allows the user to enable/disable the alarm sound during a SIP call
Enable two-way
SIP Calling
triggered by doorbell pressing.
SIP Proxy
Enables more proxy compatibility with cost of bandwidth, the SIP call will send
Compatibility
audio no matter what.
Mode
When enabled, the GSC3620 will have in SDP "packetization-mode = 0". This is
SIP Packetization
required when the device is interacting with legacy video phones that only accepts
Compatibility
Mode
this value to decode the RTP.
Enable Multi-
This feature allows the device to receive multiple calls at the same time,
channel Call
with one active and others on hold (up to 4 calls maximum).
Mode
Allows to factory reset the devices directly through SIP Notify.
If "Allow Reset Via SIP NOTIFY" is "check", then once the GSC3620 receives the
SIP NOTIFY from the SIP server with Event: reset, the device will perform a factory
reset after authentication.
Allow Reset Via
This authentication can be either with:
SIP NOTIFY
Default is unchecked (disabled).
The admin password if no SIP account is configured on the unit.
The SIP User ID and Password credentials of the SIP account if configured
on the unit.
GSC362X Series User Manual
Version 1.0.5.3
P a g e
|
38
Advertisement
Table of Contents
