Table of Contents
Advertisement
In route: outbound proxy FQDN is placed in route header. This is used for the
SIP Extension to notify the SIP server that the device is behind a NAT/Firewall.
Outbound Proxy
Mode
Always sent to: SIP messages will always be sent to Outbound proxy.
Not in route: remove the Route header from SIP requests.
This option allows 3rd party Service Provider or Cloud Solution to monitor
Enable RTCP
the operation status of the GSC3620 by using related SIP Calls.
By default, it is disabled. Users can choose either RTCP or RTCP-XR.
The H.264 payload type can now be configured to be compatible with 3
H.264 Payload
video phones, as well as other advanced SIP settings, to easy system integration
Type
process. Default is 99.
Accept Incoming
When set to "Yes", the SIP address of the Request URL in the incoming SIP
SIP from Proxy
message will be checked. If it does not match the SIP server address of the
Only
account, the call will be rejected. The default setting is disabled.
Vocoder Settings
Preferred Vocoder
Select audio codec to prioritize. Supported codecs are: PCMU and PCMA.
1
Preferred Vocoder
Select the second audio codec PCMU or PCMA.
2
Configures the number of voice frames transmitted per packet. When
configuring this, it should be noted that the "ptime" value for the SDP will
change with different configurations here. This value is related to the codec
Voice Frame Per
TX
used and the actual frames transmitted during the in-payload call. For end
users, it is recommended to use the default setting, as incorrect settings may
influence the audio quality. Range is from 1-64. The default setting is 2.
GSC362X Series User Manual
Version 1.0.5.3
rd
party
P a g e
|
36
Advertisement
Table of Contents
