Table 9: Sip Account Basic & Advanced Settings - Grandstream Networks GSC3620 User Manual

Fhd infrared weatherproof, varifocal and auto-focus dome ip camera
Hide thumbs Also See for GSC3620:
Table of Contents

Advertisement

SIP Basic Settings
This field indicates whether the account is active.
Account Active
Default setting is "Yes".
Configures the SIP account name used for identification.
Account Name
Configures the FQDN or IP of the SIP server from VoIP service provider or local
SIP Server
IPPBX.
Configures the IP address or the domain name of the outbound proxy, media
gateway, or session border controller. It is used by the GSC for firewall or NAT
penetration in different network environments.
Outbound Proxy
If a symmetric NAT is detected, STUN will not work and only an outbound proxy
can provide a solution.
Configures the backup outbound proxy to be used when the "Outbound Proxy"
Backup Outbound
Proxy
registration fails. By default, this field is left empty.
Configure which DNS mode will be used to translate the SIP Server FQDN (Default
value is A Record):
DNS Mode
Configures the SIP username or telephone number from ITSP.
SIP User ID
Note: Letters, digits and special characters including @ are supported.
Configures the Authenticate ID used by SIP proxy.
Authenticate ID
Sets the Authenticate password used by SIP proxy.
Password
Note: For security reasons, the SIP password is invisible on the web UI.
Select "User=Phone" or "Enabled" from the dropdown list.
If the SIP account has an assigned PSTN telephone number, this field should be
set to "User=Phone". Then a "User=Phone" parameter will be attached to the
TEL URI
Request-Line and "TO" header in the SIP request to indicate the E.164 number. If
set to "Enable", "Tel:" will be used instead of "SIP:" in the SIP request. The default
setting is "Disable".
SIP Advanced Settings
Registration
Sets the registration expiration time.
Expiration (m)
Default setting is 60 minutes. Valid range is from 1 to 64800 minutes.
Specifies the time frequency (in seconds) that the GSC3620 sends re-registration
Re-register before
request before the Register Expiration. The default value is 0. Range is from 0-
Expiration (s)
64800 seconds.
Table 9: SIP Account Basic & Advanced Settings
A Record.
SRV.
NAPTR/SRV.
GSC362X Series User Manual
Version 1.0.5.3
P a g e
|
34

Advertisement

Table of Contents
loading

Table of Contents