Summary of Contents for Grandstream Networks GXV3615WP_HD
Page 1
Grandstream Networks, Inc. GXV3615WP_HD GXV3615WP_HD User Manual www.grandstream.com Firmware Version 1.0.1.71 http://esupport.grandstream.com...
ABLE OF ONTENTS GXV3615WP_HD User Manual WELCOME..............................4 ..........................5 AFETY OMPLIANCES ..............................6 ARRANTY CONNECT YOUR GXV3615WP_HD ......................7 ......................... 7 QUIPMENT ACKAGE ONTENTS GXV3615WP_HD ......................7 ONNECTING THE PRODUCT OVERVIEW ..........................8 GXV3615WP_HD F ....................8 RONT AND...
Page 3
ROVISIONING 21: F ....................39 IGURE ACTORY ESET FROM NTERFACE ABLE OF ABLES GXV3615WP_HD U ANUAL 1: GXV3615WP_HD T ................... 11 ABLE ECHNICAL PECIFICATIONS Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 3 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
GSurf_Pro, Grandstream’s FREE VMS (video management systems) software that controls up to 36 cameras simultaneously; or record video using GSNVR, Grandstream’s FREE network and PC based DVR (digital video recorder) software. It is fully compliant with ONVIF standard and offers flexible HTTP API and an SDK for advanced integration.
Serious injury or death may be caused if any of the warnings below are neglected. Injury or damage to the equipment may occur if any of the following caution messages are Cautions: neglected. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 5 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
Grandstream reserves the right to remedy warranty policy without prior notification. Caution: Changes or modifications to this product not expressly approved by Grandstream, or operation of this product in any way other than as detailed by this User Manual, could void your manufacturer warranty.
PC. Wi-Fi mode has to be initially configured via wired mode before switched to run in wireless mode. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 7 of 39 Firmware Version 1.0.1.71...
IP address obtained, device in normal operation Blink Green Device is transmitting data NOTE: Green light status can be disabled via web configuration page Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 8 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
Page 9
If camera configured with scheduled recording, camera will NOT do any operation. Both Green LED will light up for about 3 seconds, then back to the previous state. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 9 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
Wi-Fi can be used to connect GXV3615WP_HD to Internet either, but user has to use wired connection to configure the Wi-Fi parameter first before it use Wi-Fi connection. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 10 of 39 Firmware Version 1.0.1.71...
Google Chrome and Apple Safari support is NOT yet supported and status pending. Please temporarily disable Antivirus or Internet Security Software when download and install the Grandstream Firefox plug-in for video or “GSViewerX.cab” for Microsoft Internet Explorer. Grandstream Networks, Inc.
Page 13
The GXV3615WP_HD by default enabled as DHCP client, it will automatically get IP address from the network with DHCP server running. User can know the IP address assigned to the camera from DHCP server log or using “SearchTool” from Grandstream GSurf_Pro free VMS software. 1. Download and install the GSurf_Pro software from Grandstream website: http://www.grandstream.com/products/tools/surveillance/gsurf_pro.zip...
Page 14
10. Firefox user need to download and install the plug-in to see the video, the plug-in for Firefox is here: http://www.grandstream.com/products/tools/surveillance/firefox_plugin.exe NOTE: Please temporarily disable Antivirus or Internet Security Software when download and install the Grandstream Firefox plug-in for video or “GSViewerX.cab” for Microsoft Internet Explorer. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 14 of 39 Firmware Version 1.0.1.71...
17. Motion Detection Alarm Indicator: If motion detection alarm triggered, the indicator will flash in red. Click the indicator icon to turn off the alarm indication. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 15 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
When click the “Language” tab, supported languages will be displayed in Figure 2. Click to select the related webpage display language. Figure 2: Web Language Switch • Currently firmware only support: English (default), Simplified Chinese and Russian. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 16 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
(*) If select this option, a valid DNS server must be configured under Basic Settings Networking button has to be clicked to save all the changes made to the device. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 17 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
Slide to adjust the built-in speaker volume. • Power Frequency: Select correct local power frequency to avoid video flicking effect under fluorescence light condition. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 18 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
If MJPEG selected, reduce fps to minimum to save bandwidth and get better image Grandstream IP Camera provides two video streams, user can use them with flexibility. For example, the high-resolution stream for local recording; another low or high resolution for remote monitoring; or vice versa depending application scenarios.
Camera Color Mode. There are three options: Color; Black/White; Auto. NOTE: Flip option recommended if camera requires ceilling installation Auto option recommended for both Shutter Speed and Color Mode. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 20 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
HTTP port changed to 8088, the RTSP port should be 10088, both 8088 and 10088 should be configured for port forwarding in order for remote camera video access. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 21 of 39 Firmware Version 1.0.1.71...
• Key: Key for security enhanced Wi-Fi network the camera try joining. • Security Mode: The security mode Wi-Fi access point or router used. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 22 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
• STUN Server: Stun server FQDN or IP. If device behind a non-symmetric router, STUN server can help to penetrate & resolve NAT issue. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 23 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
This page allows user to configure SIP related parameters. GXV3615WP_HD can be configured as SIP endpoint to call out when alarm trigged; or allow permitted number to call in to check the video if Grandstream video IP phone is used. Figure 9-1: SIP Setting Page •...
Phone List/Phone Number: Callee or call receiver number when alarm call trigged. • White List/Phone Number: Phone numbers allowed to call into the camera. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 25 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
When SIP account registered, the status will display “Online” in Green. When SIP account unregistered, the status will display “Offline” in Red, as below. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 26 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
When checked, no security enhanced. Any person can view the camera if knowing the IP or FQDN of the camera, but can NOT change anything, just view ONLY. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 27 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
Time interval for automatic upgrade, default 10080 • Automatic Upgrade: Checked to enable automatic firmware upgrade and provisioning. NOTE: Only XML based automatic provisioning is supported by GXV3615WP_HD. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 28 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
Click “Test” after configuration, if setting is correct, a test email will send out and “Test successful!” yellow bar will display like below Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 29 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
Click “Test” after configuration, if setting is correct, a test FTP operation will be performed and “Test successful!” yellow bar will display if the operation is successful. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 30 of 39 Firmware Version 1.0.1.71...
Grandstream provide HTTP API to help 3 party company by using HTTP server or VMS to develop further solutions for its customers. Grandstream IP Camera and DVS (include GXV3615WP_HD) are ONVIF certified. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 31 of 39 Firmware Version 1.0.1.71...
Upload to Alarm Center: When checked, the alarm video will be transferred to Alarm Center, like Grandstream free GSurf_Pro VMS software. NOTE: Grandstream free GSurf_Pro VMS software can be downloaded here: http://www.grandstream.com/products/tools/surveillance/gsurf_pro.zip Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 32 of 39 Firmware Version 1.0.1.71...
As shown in Figure 16-2, user can configure the Motion Detection Region with related Start and Stop time to control the motion detection operation. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 33 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
Syslog Server: Syslog server IP or Domain Name • Syslog Lever: Lever of syslog message sent to the syslog server: None, Debug, Info, Warning, Error. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 34 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
If camera configured with scheduled recording, camera will NOT do any operation. Both Green LED will light up for about 3 seconds, then back to the previous state. Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 35 of 39 Firmware Version 1.0.1.71 Last Updated: 03/2013...
Motion trigged Snapshot JPEG file will be listed here. • Video List: Motion trigged video recording clip will be listed here. NOTE: Grandstream free GSNVR DVR software can be downloaded here: http://www.grandstream.com/products/tools/surveillance/GSNVR_1.0.0.28_en.exe Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 36 of 39 Firmware Version 1.0.1.71...
Figure 20: Firmware Upgrade and Provisioning NOTES: Grandstream recommends end-user use the Grandstream HTTP server. Its address can be found http://www.grandstream.com/support/firmware . Currently the HTTP firmware server IP address is 72.172.83.110. For large companies, we recommend to maintain their own TFTP/ HTTP/HTTPS server for upgrade and provisioning procedures.
Configuration File Download Grandstream SIP Device can be configured via Web Interface as well as via Configuration File through TFTP or HTTP/HTTPS. “Config Server Path” is the TFTP or HTTP/HTTPS server path for configuration file. It needs to be set to a valid URL, either in FQDN or IP address format. The “Config Server Path” can be same or different from the “Firmware Server Path”.
Restoring the Factory Default Setting will DELETE all configuration information of the camera. Please BACKUP or PRINT out all the settings before approach to following steps. Grandstream will not take any responsibility if you lose all the parameters of setting or cannot connect to your VoIP service provider.