Installing The Dryer Temperature Control Knob - Kodak HEALTH SCIENCES X-Omat M43 Installation Instructions Manual

Installing the DRYER TEMPERATURE CONTROL KNOB

[1] Install the DRYER TEMPERATURE CONTROL KNOB.
(a) Align the SETSCREW of the KNOB with the flat section of the STEM.
(b) Press the DRYER TEMPERATURE CONTROL KNOB onto the STEM of the DRYER
TEMPERATURE CONTROL.
(c) Check that the DRYER TEMPERATURE CONTROL KNOB is not touching the FRONT ACCESS
PANEL.
Installing the DRYER TEMPERATURE CONTROL KNOB
Figure 56
981088 – September 1995
Ready
Dryer
Wait
Temperature
Service
- +
DRYER TEMPERATURE
CONTROL KNOB
H130_0003ACB
H130_0003AA
Installing the KNOBS
65