Table of Contents
Advertisement
Section 1: Unpacking the PROCESSOR
Removing the Components
Figure 1
EXIT ROLLER
ASSEMBLY
DRYER RACK
shipping
carton
metal
bands
BACK
ACCESS
PANEL
TOP
COVER
SIDE ACCESS
PANEL (2)
981088 – September 1995
EVAPORATION
COVER (2)
SPLASH
GUARD
FEED
TRAY
H130_0140CCA
H130_0140CA
[1] Cut the metal bands, open the shipping carton, and
remove any packing material.
Important
When removing protective packing material or
wrapping from components, be careful not to cut
through the protective wrapping and damage the
component.
[2] Remove the items packed with the PROCESSOR.
See publication 1C7052 in the front pocket of
your publications binder for a list of the items
packed with your PROCESSOR model.
[3] Remove:
• shipping carton from around the
PROCESSOR
• any other packing materials
• TOP COVER from the PROCESSOR
• EVAPORATION COVERS for the
DEVELOPER and FIXER RACKS
• 2 SIDE ACCESS PANELS and the BACK
ACCESS PANEL by loosening the
2 SCREWS securing each PANEL
• POWER CABLE (provided with the M43A
only)
Unpacking the PROCESSOR
5
Advertisement
Table of Contents
