Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Section 13: Installing the FEED TRAY
[1] Check that the FRONT ACCESS PANEL is installed on the PROCESSOR.
[2] Align the FEED TRAY so that it is flush with the FRONT ACCESS PANEL on the PROCESSOR.
[3] Install the following parts that secure the FEED TRAY onto the PROCESSOR:
• 2 SCREWS
• 2 LOCK WASHERS
• 2 WASHERS
Installing the FEED TRAY
Figure 57
Section 14: Installing the LIGHTTIGHT FEED TRAY
If you plan to install a LIGHTTIGHT FEED TRAY, see the Installation Instructions, Publication Number 1C0937,
provided with the kit.
66
SCREW (2)
LOCK WASHER (2)
WASHER (2)
FEED TRAY
September 1995 – 981088
H130_0084BCA
H130_0084BA
Advertisement
Table of Contents
