Automatic And Manual Redialing; Optional Settings When You Send A Fax Manually; Printing Page Headers - Brother MFC4450 Owner's Manual

MFC 4450/OP-US-5.0

Automatic and Manual Redialing

If a number you have dialed is busy or your call did not go through for some other
reason, you can redial that number. There are two ways to redial: "automatic" and
"manual." Automatic redialing can be used only for faxes that were sent using
automatic transmission—not for telephone calls. The MFC automatically will redial
the number 3 times at 5 minute intervals before giving up. It will redial the last dialed
number when you press Redial (manual redialing).

Optional Settings When You Send a Fax Manually

• Resolution (See page 5-3, 5-16~17.)
• Contrast (See page 5-4.)
• Cover Page (See page 5-17~22.)
• Overseas Mode (See page 5-15.)
• Call Reservation (See page 5-23~24.)

Printing Page Headers

Your MFC can print a page header on the top of every fax you send. It is
printed on the receiving party's fax paper. It contains the date and time of
transmission, your fax number and name (Station ID), and page number.
Of course you must register your Station ID beforehand for that information
to be available. (See page 3-3~4.)
Transmission Date and Time
09/12/1998
BASIC FAX TRANSMISSIONS
FOR YOUR INFORMATION
Station ID
15:25 4155554444
SENDING FAXES
Page Number
BROTHER PAGE 01
5 - 7