MFC 4450/OP-US-5.0
5. SENDING FAXES
A)
DOCUMENT
The Size of Your Documents
216mm (8.5")
Maximum
The size of the documents you want to send by fax should not be larger (or smaller)
than your MFC can accommodate. The documents should each be between 5.8 and 8.5
inches (148 and 216 mm) wide and between 3.9 and 35.4 inches (100 and 900 mm)
long.
The maximum width of the scanned area, that can be printed on the recording paper
of the recipient's fax, is 8.2 inches (208 mm).
How to Insert the Document
To send a fax, first insert the document you wish to send, face down,
in the document feeder. The top edge of the document should go in
first, or the fax will be received upside down.
To prevent the document from skewing as it is fed, adjust the paper
guides to fit the width of the document.
DOCUMENT BASICS
BASICS
148mm
(5.8")
Minimum
900mm
(35.4")
SENDING FAXES
216mm (8.5")
208mm (8.2")
4mm
100mm
(3.9")
scanned
(printed)
area
4mm
TOP
5 - 1