Getting Familiar With The Broadcasting Function - Brother MFC4450 Owner's Manual

MFC 4450/OP-US-5.0

Getting Familiar with the Broadcasting Function

* To stop the broadcast in progress, press Stop.
* Enter the chain dialing numbers as you normally would, but keep in
mind that each key counts as one location, so the number of locations you
can call becomes limited. (You have up to 60 locations you can call with
One-Touch, Speed-Dialing, and group numbers.)
* If the line is busy or for some other reason a connection could not be made
while broadcasting, the MFC will redial the number automatically. (See
page 5-7.)
* If the memory is full, press Stop to abort the job or press Start to send
the portion that is in the memory (if more than one page has been
scanned.) (See page 5-8.)
KEYS TO PRESS
1 . Insert the documents into the feeder.
2 . Press Super Q.Scan.
3 . Enter the One-Touch key(s) and/or Speed-
Dial number(s), one after the other, or a
Group number.
Example: Group number.
4 . Press Start and the MFC will read the
documents into memory, and then start
sending faxes to all the numbers you
entered.
ADVANCED FAX TRANSMISSIONS
FOR YOUR INFORMATION
SENDING FAXES
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 8 1 5 : 2 5
O N L I N E
FAX: NO. & START
S C A N R E A D Y
COPY: PRESS COPY
S C A N R E A D Y
MEMORY 100%
O N L I N E
ENTER FAX NO.
O N L I N E
A L L B R O T H E R
O N L I N E
MEMORY 100%
O N L I N E
D I A L I N G
O N L I N E
SENDING P.01
O N L I N E
5-11