MFC 4450/OP-US-5.0
RECEIVING FAXES AND OTHER CALLS
Setting the Print Density
You can set print conditions with the following steps. Press Z (left arrow) to make
the print lighter and X (right arrow) to make the print darker. If the print is still too
light or too dark, you can adjust it further by turning the Print Density Dial located
in the right corner under the top cover. (Remove the drum unit to find the dial. See
page 14-5 for more information.)
KEYS TO PRESS
1 . Press Function.
2 . Press 5.
3 . Press 9.
The display will alternate messages.
4 . Use Z (left arrow) or X (right arrow) to
change the settings.
5 . Press Set.
6 . Press Stop to exit.
Toner Save Function
This function lets you extend the life of the toner by conserving its use. When the
Toner Save is set to ON, the print appears somewhat lighter. This feature is also
available when copying. The default setting is OFF.
KEYS TO PRESS
1 . Press Function.
2 . Press 5.
6 - 9
BASIC SETUP TO RECEIVE FAXES
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 8
1 5 : 2 5
O N L I N E
ENTER
NO.
&
SET
5 . U S E R
O P T I O N S
9 . P R I N T
D E N S I T Y
SELECT
{
}
&
9 . P R I N T
D E N S I T Y
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 8
1 5 : 2 5
O N L I N E
ENTER
NO.
&
SET
5 . U S E R
O P T I O N S
SET