How To Enter Special Characters, Symbols And Punctuation Marks In Function Mode - Brother MFC4450 Owner's Manual

MFC 4450/OP-US-5.0
HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY
KEYS TO PRESS
1 . Press 2 twice to enter the letter B.
2 . Press 7 three times to enter the letter R.
3 . Press Set.
1 . If you want to enter a blank space, press X (right arrow) twice.
2 . If you entered a letter incorrectly and want to change it, you can use Z
(left arrow) to move the cursor back. When you reach the letter, you can
enter a new one in it's place. You can only overwrite letters, not insert
them, so you may have to go back and overwrite a lot of letters if you
forget to enter a letter.
3 . If you have to enter a character that is assigned to the same dial pad key
as the previous character, press X (right arrow) to move the cursor to
the right.
How to Enter Special Characters, Symbols and Punctuation Marks
in Function Mode
0 key --------
* key ------- (space) !"#$%&'()*+,-./
# key -------- :;<=>?@[]^_
The "0" key contains all the accented characters. The "*" and the "#" key are used for
punctuation marks and symbols. Let's say that you want to enter the Symbol "&".
Follow the example on the next page.
FOR YOUR INFORMATION
ÄËÖÜÀÇÈÉ0
THE DISPLAY WILL SHOW:
N A M E :
ENTER & SET
N A M E : B
N A M E : B R
2 - 9