Setting The Daily Timer (For Delayed Transmissions); Delayed Transmission - Brother MFC4450 Owner's Manual

MFC 4450/OP-US-5.0

Setting the Daily Timer (for Delayed Transmissions)

The Daily Timer function lets you send a fax at a preset time every day. This is handy
for sending delayed jobs that must go out at the same time daily. Once you enter the
time, you don't have to enter it again. The setting will stay the same until you change
it. So you can use it every day, or only on days when you need it.
KEYS TO PRESS
1 . Press Function.
2 . Press 7.
3 . Press 2.
4 . Enter the time in 24-hour format using
the dial pad.
Example: 19:45 (7:45 P.M.).
5 . Wait for two seconds, press Stop to exit.

Delayed Transmission

You can use the timer to send documents at a later time (up to 24 hours later). When
the preset time is displayed, accept it or enter a new time if needed. Your MFC also
will produce a report, the "Delayed Sending Report", after the fax is sent. You can set
up to three different documents for delayed transmission.
KEYS TO PRESS
1 . Insert the documents into the feeder.
ADVANCED FAX TRANSMISSIONS
SENDING FAXES
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 8 1 5 : 2 5
O N L I N E
ENTER NO. & SET
7 . S E T U P S Y S T E M
2 . D A I L Y T I M E R
E N T E R T I M E : 0 0 : 0 0
E N T E R T I M E : 1 9 : 4 5
2 . D A I L Y T I M E R
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 8 1 5 : 2 5
O N L I N E
FAX: NO. & START
S C A N R E A D Y
COPY: PRESS COPY
S C A N R E A D Y
5 - 9