Multipurpose Sheet Feeder - Brother MFC4450 Owner's Manual

MFC 4450/OP-US-5.0

Multipurpose Sheet Feeder

The MFC has a multipurpose sheet feeder that can feed plain paper, envelopes and
organizer paper.
When the MFC receives data, it begins the print process by loading paper from the
multipurpose sheet feeder.
KEYS TO PRESS
1 . Select and set the PC command and
status.
2 . Your PC will send a print command and
data to the MFC.
If the MFC is in sleep mode, it will wake
up. (See page 2-10~11.)
3 . When the PC has sent the first page data,
the MFC will start printing.
4 . The MFC will start to print the next page
automatically.
Example: 2 pages of data
5 . When the MFC finishes printing all the
data, it will return to online status.
If some data is still remaining in memory,
press On/OffLine and then press FF/
Cont.
Helpful Hints
When you use labels or transparencies for overhead projectors, be sure to
use the manual feed slot. See the next section "Manual Feed Slot" for more
information.
USING THE MFC AS A PRINTER
You may select the proper paper source, paper size, and orientation
in your application software.
If your application software does not support your custom paper
size, select the next larger paper size. Then adjust the print area by
changing the right and left margins in your application software.
NOTICE
THE DISPLAY WILL SHOW:
09/12/1998 15:25
O N L I N E
09/12/1998 15:25
RECEIVING DATA
09/12/1998 15:25
REMAINED DATA
09/12/1998 15:25
REMAINED DATA
09/12/1998 15:25
O N L I N E
09/12/1998 15:25
REMAINED DATA
9 - 7