Connections; Connecting An External Telephone; Connecting An External Tad (Telephone Answering Device); Sequence - Brother MFC-9700 Owner's Manual

Connections

Connecting an External Telephone

Although your MFC does not have a handset, you can connect a separate
telephone (or telephone answering device) directly to the MFC.
Connect the modular plug on the telephone's line cord to the jack labeled EXT.
on the left side of the MFC.
Whenever this phone (or TAD) is in use, the LCD shows TELEPHONE.
Connecting an External TAD
(Telephone Answering Device)

Sequence

You might choose to connect an answering system. However, when you have an
external TAD on the same telephone line as the MFC, the TAD answers all calls. The
MFC "listens" for fax calling (CNG) tones. If it hears them, the MFC takes over the
call and receives the fax. If it doesn't hear CNG tones, the MFC lets the TAD continue
playing your outgoing message so your caller can leave you a voice message.
The TAD must answer within five rings (the recommended setting is two rings).
The MFC cannot hear CNG tones until the TAD has answered the call, and with
five rings there are only 8–10 seconds of CNG tones left for the fax
"handshake." Make sure you carefully follow the instructions in this manual for
recording your outgoing message. We do not recommend using the toll saver
feature on your external answering machine if it exceeds five rings.
If you do not receive all your faxes, you must reset the setting on your external
TAD to four rings.
Connections
The external TAD must be plugged into the left side of the MFC in the jack labeled
EXT. Your MFC cannot work properly if you plug the TAD into a wall jack.
If You Subscribe to your Telephone Company's Distinctive Ring Service:
You may connect an external TAD to a separate wall jack only if you subscribe
to your telephone company's Distinctive Ring service, have registered the
distinctive ring pattern on your MFC, use that number as a fax number and have
set your MFC's Receive mode to MANUAL. The recommended setting is
three or four rings on the external TAD when you have the telephone
company's Distinctive Ring service.
If You Do NOT Subscribe to Distinctive Ring Service:
You must plug your TAD into the EXT. jack of your MFC. If your TAD is
plugged into a wall jack, both your MFC and the TAD will try to control the
phone line. (See on page 2-10.)
illustration
2 - 9
A S S E M B L Y A N D C O N N E C T I O N S