Using The Remote Printer Console Main Program - Brother MFC-9700 Owner's Manual

Using the Remote Printer Console Main Program

Type C:\RPCX>RPCX, and then press the Enter key to start the Remote
Printer Console main program.
The Main Screen will appear on your computer screen as shown below.
If bi-directional communication is enabled between your computer and MFC
when it starts, the RPC gets the current settings information from your MFC.
Otherwise, RPC shows its default settings. If you want to change settings, move
the cursor to the item you want and select it using the Enter and Cursor keys.
Then, press the Enter key to make the selected settings valid.
There are four sub menus. (See table below.) Select the sub menu you want by
clicking on it with the mouse, using the cursor keys and the Enter key, or by
pressing the hot key commands for that sub menu.
Menu Press the keys Functions
Direct Alt + D
Access
Printer Alt + P
Setup
Console Alt + C
Config
Guide Alt + G
Help F1
Remote Printer Console
Direct_Access Printer_Setup
Current Status
Status Ready
Media Type Regular
Paper feed Paper Cassette
Emulation Laser Jet IIP
Paper Size Letter
Orientation Portrait
Quality Normal
Copies 1
Memory size 2138112 Byte
[↑/¬] Select [Enter] Setting
[Alt+Character] Menu [F1] Help
You can directly control the Brother MFC, with
Print Form.
You can enter the setting mode to change other
printer settings, such as, margin settings, continue
mode, font and sleep mode.
You can change the environment settings for the
RPC program: color, etc.
You can go to the Guide mode.
You can get Online Help: If you press F1, you can
get information on a highlighted item.
Console_Config Guide
[ESC] Exit
F O R D O S U S E R S
12 - 3