Fax Resolution; Composing Electronic Cover Page - Brother MFC-9700 Owner's Manual

Fax Resolution

When you have an original in the ADF or on the scanner glass, you can use the
Fax Resolution key to temporarily change the setting. Press Fax
Resolution repeatedly until the LCD shows the setting you want.
—OR—
You can change the default setting for all faxes.
1
Press Menu, 2, 2, 2.
2
Press
or
you want, and then press Set.
3
Press Stop/Exit.
STANDARD
FINE - Good for small print; transmits a little slower than Standard resolution.
SUPER FINE
resolution.
PHOTO - Use when original has varying shades of gray; slowest transmission
time.

Composing Electronic Cover Page

The cover page is generated at the receiving party's MFC. Your cover page
includes the name stored in the One Touch or Speed Dial memory. If you are
dialing manually, the name is left blank. (See
, page 7-4.)
Dialing
The cover page indicates your Station ID and the number of pages you're
sending. If you have Coverpage Setup set to
of pages remains blank. (See
You can include a comment on your cover page.
Instead of using one of the pre-programmed comments above, you can enter one
of two customized messages. (Up to 27 characters long) Use the chart on page
4-2 to help enter characters. (See
Most of the SETUP SEND
you to make adjustments for each fax you send. However, you can set up your
cover page and cover page comments in advance. The Cover Page Setup and
Cover Page Message menu selections change the default settings.
6 - 7
S E T U P S E N D
to select the resolution
- Suitable for most typed documents.
- Good for small print or artwork; transmits slower than Fine
Setting Station ID
Composing Your Own Comments
menu selections are temporary settings that allow
One Touch Dialing
ON (Menu, 2, 2, 8), the number
, page 4-3.)
and
Speed
, page 6-8.)