Setting Cassette Usage; Setting Date And Time - Brother MFC-9700 Owner's Manual

Setting Cassette Usage

The default setting of
#2 if paper is out in Cassette #1 or if incoming faxes will fit best on the paper in
Cassette #2. Choose
CASSETTE USAGE
control when it is used.
1
Press Menu, 1, 1.
2
Press or
USAGE, and then press Set.
3
To set cassette usage for faxes, press
press Set.
—OR—To set cassette usage for copies, press
COPY, and then press Set.
—OR—If you are finished, go to Step 5.
4
Press or
ONLY, and then press Set.
5
Press Stop/Exit.

Setting Date and Time

Your MFC displays the date and time, and prints it on every fax you send.
In the event of a power failure, you may have to reset the date and time. All other
settings remain unaffected.
1
Press Menu, 1, 2.
2
Enter the last two digits of the year, and
then press Set.
For example, enter 02 for the year 2002.
3
Enter two digits for the month, and then
press Set.
For example, enter 09 for September,
or 10 for October.
4
Enter two digits for the day, and then
press Set.
For example, 06
5
Enter the time in 24-hour format, and
then press Set.
For example, enter 15:25 for 3:25 PM.
6
Press Stop/Exit.
The LCD now shows the date and time you set whenever the MFC is standing
by.
AUTO allows your MFC to choose the optional Cassette
CASSETTE#1 ONLY,
if you want to keep special paper in the other cassette and
to select CASSETTE
to select AUTO, CASSETTE#1 ONLY
CASSETTE#2 ONLY
or to select FOR
or to select
or
I N I T I A L S E T U P
or
FAX, and then
FOR
CASSETTE#2
4 - 2