Scanning Difficulties; Software Difficulties - Brother MFC-9700 Owner's Manual

DIFFICULTY
The MFC cannot print full
pages of a document.
The MFC prints first couple
of pages correctly, then some
pages have text missing.
The MFC cannot print full
pages of a document.
OUT OF MEMORY
message occurs.
My headers or footers appear
when I view my document on
the screen but do not up when
I print them.
TWAIN Errors appear while
scanning.
You see the "New Hardware
Found" message on your PC
screen (although you have
already installed the drivers
in Windows 95).
You see the "Update Device
Driver Wizard" or "Add New
Hardware Wizard" message
on your PC screen
(although you have already
installed the drivers in
Windows 95 or 98).
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
SUGGESTIONS
The MFC received a very complex print job and could not
process part of the page. This print. may be solved in several
ways. If you are using Windows
Professional or Windows NT
the supplied printer driver, see the "Windows
Difficulties" section. Try to reduce the complexity of your
document or reduce print resolution.
Your computer is not recognizing the printer's input buffer
full signal. Please make sure to connect the printer cable
correctly.
Reduce the printer resolution. Reduce the complexity of your
document and try again. Reduce the graphic quality or the
number of font sizes within your application software.
Most laser printers have a restricted area that will not accept
print. Usually these are the first two lines and last two lines,
leaves 62 printable lines. Adjust the top and bottom margins
in your document to allow for this.

Scanning Difficulties

Make sure the Brother TWAIN Driver is selected as the
primary source. In PaperPort
select Source, and then highlight the Brother TWAIN Driver
and click Select.

Software Difficulties

Click on 'Do not install a driver. (Windows will not prompt
you again)' and click 'OK'.
Follow the instructions from the installer, then click Next.
Click Finish when it appears on the screen.
®
95/98/98SE/Me/2000
®
Workstation Version 4.0 with
®
Setup Printing
®
, from the File menu select File,
21 - 8