Fan Connectors (Fan1/2/3); Spdif Out Connector (Jp18)(White) - Shuttle FS58 Manual

Fan Connectors - FAN1/2/3
D2
The mainboard provides four onboard 12V cooling fan power connectors to
support System (FAN1), Chipset (FAN2) or CPU (FAN3) cooling fans.
PWM_CTRL
SPEED_SENSE
+12V
1
SPEED_SENSE
+12V
GND
1
Note :
Both cable wiring and type of plug may vary , which depends on the
fan maker. Keep in mind that the red wire should always be connected
to the +12V header and the black wire to the ground (GND) header.

SPDIF OUT Connector (JP18)(White)

D3
Port JP18 can be used to connect special device.
1
2
3
JP18
Pin Assignments (JP18):
1=SPDIF_OUT
2=VCC
3=GND
GND
- 36 -
FAN1
1
JP18
1
SPIF-Out
FAN3
1
FAN2
1