Shuttle FS58 Manual page 67

IDE DMA transfer access
Improve IDE HD/CDROM transfer performance.
Ø The choice: Enabled or Disabled.
IDE Burst Mode
Selecting Enabled reduces latency between each drive read/write cycle,
but may cause instability in IDE subsystems that cannot support such
fast performance. If you are getting disk drive errors, try setting this value
to Disabled. This field does not appear when the lnternal PCI/IDE field,
above, is Disabled.
Ø The choice: Enabled or Disabled.
IDE HDD Block Mode
Select Enabled for automatic detection of the optimal number of block
read/write per sector the drive can support.
Ø The Choice: Enabled or Disabled.
Onboard PCI Device
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
SiS USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have USB peripherals.
Ø The choice: Enabled or Disabled.
USB 2.0 Supports
Select Enabled if your system contains a Universal Serial Bus 2.0 con-
troller and you have USB peripherals.
Ø The Choice: Enabled or Disabled.
USB Keyboard Support
This item is used to defined USB Keyboard id Enabled or Disabled.
Ø The Choice: Enabled or Disabled.
SiS AC97 Audio
This item allows you to control the onboard AC97 Audio.
Ø The Choice: Enabled or Disabled.
Onboard LAN Boot ROM
Decide whether to invoke the boot ROM of the onboard LAN chip.
Ø The choice: Enabled or Disabled.
- 62 -