Front-Panel Connector; Atx Power On/Off Switch Connector (Pwon); Hdd Led Connector (Hled) - Shuttle FS58 Manual

F
Front-Panel Connectors

ATX Power On/Off Switch Connector (PWON)

B1
The Power On/Off Switch is a momentary type switch used for turning on or off
the system ATX power supply. Attach the connector cable from the Power Switch
to the 2-pin (PWON) header on the mainboard.
Note : Please notice all the LED connectors are directional. If your chassis's
B1

HDD LED Connector (HLED)

Attach the connector cable from the IDE device LED to the 2-pin (HDD LED)
header. The HDD LED lights up whenever an IDE device is active.
LED does not light up during running, please simply change to the
opposite direction.
Front Panel (JP8)
RST HLED
PWON GLED/PWR LED
Front Panel (JP8)
HLED
RST
PWON GLED/PWR LED
- 31 -
1
1