Shuttle FS58 Manual page 60

Limit CPUID MaxVal
Set Limit CPUID MaxVal to 3,Should Be "Disabled" for WinXp.
Ø The choice: Disabled or Enabled.
NX BIOS Control
When disabled, forces the NX feature flag to always return 0.
Ø The choice: Disabled or Enabled.
Hard Disk Boot Priority
This item allows you to select Hard Disk Book Device Priority.
Bios Write Protect
This item allows you to enable or disable the Bios Write Protect. If you
want to flash BIOS, you must set it Disabled.
Ø The choice: Enabled or Disabled.
CPU L1&L2&L3 Cache
All processors that can be installed in this mainboard use internal level1(L1)
, external 2(L2) cache memory and (L3) to imporve performance. Leave
this item at the default value for better performance.
Ø The choice: Enabled or Disabled.
Hyper-Threading Technology
The latest Intel application defines a high-speed calculating ability to op-
timize your system by two CUPs supported(one virtual, one physical) in a
multi-task environment.
Ø The choice: Enabled, or Disabled.
CPU L2 Cache ECC Checking
When you select Enabled, memory checking is enabled when the
CPU internal L2 cache contains ECC SRAMs.
Ø The choice: Enabled or Disabled.
Quick Power On Self Test
This item speeds up Power-On Self Test (POST) after you power on the
computer. If it is set to enabled, BIOS will shorten or skip some check
items during POST.
Ø The choice: Enabled, or Disabled.
First/Second/Third Boot Device
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items.
Ø The Choice : Floppy, LS120, Hard Disk, CDROM, ZIP100,
USB-FDD, USB-ZIP, USB-CDROM, LAN or Disabled.
- 55 -