Wireless Keyboard And Mouse Connectors (Jp2); Ir Connector (Jp13) - Shuttle FS58 Manual

Wireless Keyboard and Mouse Connectors (JP2)

D8
Port JP2 can be used to connect wireless keyboard and mouse device.
4 mini Jumper must be setted on pin 5-6, 7-8, 9-10 and 11-12 when this
header is not used.
Pin Assignments (JP2):
1=VCC
3=GND
5=MSCLK
7=MSDATA
9=KBCLK
11=KBDATA

IR Connector (JP13)

D9
If you have an infrared device, this mainboard can implement IrDA tranfer func-
tion. To enable the IrDA transfer function, follow these steps:
Pins Assignment (JP13):
1=NC
2=KEY
3=VCC
4=Ground
5=IrTx
6=IrRx
Note : Before connect your IR device, please be sure each IR on board pin
allocation is matchable with the pin of the IR device. Other wise,
incorrect IR connection may do damage to your IR device.
Step1 : Attach the 6-pin infrared device cable to J7.
(Refer to the above diagram for IR pin assignment.)
Step2 : This mainboard support IrDA, or Normal transfer modes.
2=VCC
4=KEY
6=MS_CK
8=MS_DK
10=KB_CK
12=KB_DK
JP13
- 39 -
Wireless KB/MS
1
JP2
11 9 7 5 3 1
12 10 8 6 4 2
IR Connector
1
JP13