Table of Contents
Advertisement
- I/O Interface
Provides a variety of I/O interfaces:
Ø 1 x DB9 Serial port.
Ø 1 x DB15 VGA port.
Ø 1 x SPDIF-In port.
Ø 1 x 1394 port.
Ø 1 x PS/2 Mouse port.
Ø 1 x PS/2 Keyboard port.
Ø 1 x LAN port.
Ø 2 x USB 1.1/2.0 ports.
Ø 1 x SPDIF-Out RCA port.
Ø 1 x Line-In port.
Ø 1 x 5.1 Channel Center/Bass port.
Ø 1 x 5.1 Channel Rear-Out port.
Ø 1 x 5.1 Channel Front-Out port.
Ø 1 x Clear CMOS button.
- PCI Bus Master IDE Controller Onboard
Two Ultra DMA 33/66/100/133 Bus Master Dual-channel IDE ports provide
support to a maximum of four IDE devices (one Master and one Slave per chan-
nel). The IDE Bus implements data transfer speeds of up to 33/66/100/133
MB/sec and also supports Enhanced PIO Modes. 80-pin Cable Backward Com-
patible Legacy ATAPI Devices, ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-
120 Supports.
- ATX Power Supply Connector
ATX power supply unit can connected to the onboard 20-pin Pentium 4 stan-
dard ATX power connectors, supporting Suspend and Soft-On/Off by dual-func-
tion power button. The Pentium 4 ATX power include other 4-pin +12V ATX
power connector.
- Advanced Configuration and Power Interface
Features four power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Sus-
pend to DISK), and S5 (Soft-Off). ACPI provides more efficient Energy Saving
Features controlled by your operating system that supports OS Direct Power
Management (OSPM) functionality.
- System BIOS
Provides licensed Award BIOS V6.0 PG on 4Mb Flash core and supports Green
PC, Desktop Management Interface (DMI).
- 9 -
Advertisement
Table of Contents
