Front-Panel Connectors Hdd Led Connector(Hd_Led); Green Led Connector (Sp_Led) - Shuttle MV43P User Manual

F
Front-Panel Connectors
HDD LED Connector (HD_LED)
C1
Attach the connector cable from the IDE device LED to the 2-pin (HD_LED)
header. The HDD LED lights up whenever an IDE device is active.
Note: Please notice all the LED connectors are directional. If your chassis's
LED does not light up during running, please simply change to the
opposite direction.

Green LED Connector (SP_LED)

C2
The Green-LED(SP_LED) indicates that the system is currently in one of the power
saving mode(Doze/Standby/Suspend). When the system resumes to normal
operation mode, the Green LED will go off. Attach a 2-pin Green LED cable to
Green LED header.
- 33 -
SP_LED
PW-BN
2
1
HD_LED RST
PANEL2
SP_LED
PW-BN
2
1
HD_LED RST
PANEL2