Houghton BELAIRE Owner's Manual page 20

HEAT mode
Press the "MODE" key, select the

temperature .Press the"FAN"key to select different speed. The panel will display
temperature（Initial 3 seconds flashing the set point temperature）.
AUTO mode
Press the "MODE" key, select the "

the " FAN" key to select different fan speed. The panel will display
environment temperature（Initial 3 seconds flashing the set point temperature）.
FURNACE mode
This function is available in heat pump & furnace model only.Press the "FURNACE" key to activate furnace as primary

heating and the buzzer sounds once. Heat pump operation will stop. Press the same key again to disable this overriding
function and the buzzer will sound twice.
mode. Press the up " ▲ " key to set the temperature higher than the room
" mode. Press the up "▲" or down "▼" key to set different temperature.Press
17
and the indoor environment
and or , and the indoor