Storing Speed Dial Numbers - Brother MFC-9030 Owner's Manual

Storing Speed Dial Numbers

You can store Speed Dial numbers, which you dial by pressing only four keys. There are 100 Speed
Dial locations. (See Speed Dialling, page 24.)
1
For the FAX, press Menu/Set, 2, 3, 2.
For the MFC, press Menu/Set, 2, 3, 1.
The screen prompts you to enter a location.
2
Use the dial pad to enter a two-digit location (00-99), and press Menu/Set. The screen displays
your entry, then prompts you to enter the number you're storing.
3
Enter the number (up to 20 digits), and press Menu/Set.
The screen now prompts you to store a name with this number.
4
Use the dial pad to enter the name (up to 15 characters). (See Entering Text, page 147.)—OR—
Go to Step 5 to store the number without a name.
5
Press Menu/Set. Return to Step 2 to store another Speed Dial number—OR—Press Stop/Exit.
When you dial a Speed dial number, the screen displays the name you have stored or if you have not
stored a name, the number you have stored.
Changing One Touch (FAX-8070P) and Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where a number is already stored,
the screen displays the current name stored there, then prompts you to either change it or exit.
1
Press 1 to change the number stored, or press 2 to exit without making a change.
2
Enter a new number.
N If you want to erase the number, press Stop/Exit when the cursor is to the far left of the
digits.
N If you want to change a digit, use
to change, then enter the new digit—OR—Press Stop/Exit to delete all characters above
and to the right of the cursor.
3
Follow the directions in Storing One Touch Dial or Speed Dial Numbers.
You can print a list of all stored numbers. (See Using the Reports Key, page 36.)
22
Chapter 1
or to position the cursor under the digit you want