Preparation And Simple Use; Preparation And Simple Use Guide - Brother MFC-9030 Owner's Manual

Preparation and Simple Use Guide

Steps to prepare and use the machine simply
Follow the steps below to prepare and use the machine simply.
However, before you perform these steps, see Important Safety Information (page 139), and
Advice for Preparation and Simple Use Guide (page 3).
If you need further information, refer to BASIC FAX USE or ADVANCED FAX USE.
1 Read the Quick Setup Guide
Follow the instructions on the Brother Quick Setup Guide to set up the machine.
2 Setting the Document
I Documents must be between 14.8 and 21.6 cm wide, and 15 and 60 cm long. This machine
can only scan an image 20.8 cm wide, regardless of how wide the document is.
I Make sure you insert documents face down, top edge first.
I Adjust the paper guides to fit the width of your document.
I The automatic document feeder (ADF) can hold up to 20 pages, feeding each one individually
through the machine. Use standard (64 g/m
using heavier paper, feed each sheet individually to prevent paper jams.
Paper Guides
2
~90 g/m
2
) paper when using the ADF; if you're
Approx. 1.3 cm
Preparation and Simple Use Guide
1