Retrieving Fax Messages; Changing The Fax Forwarding Number - Brother MFC-9030 Owner's Manual

Retrieving Fax Messages

1
Dial the machine's number.
2
When you hear the beep, immediately enter your Remote Access Code
(the factory setting is 1 5 9
3
As soon as you hear two short beeps, use the dial pad to press 9 6 2.
4
Using the dial pad, enter the number (up to 20 digits) of the remote fax machine where you want
your fax messages forwarded, and then press # #.
You cannot use
press #.
5
After you hear the machine beep, hang up and wait.
The machine calls the remote fax machine and sends the stored documents. The remote fax
machine prints your fax messages.

Changing the Fax Forwarding Number

You can change the default setting of your fax forwarding number from a remote telephone/fax
machine using touch tone.
1
Dial the machine's number.
2
When you hear the beep, immediately enter your Remote Access Code
(the factory setting is 1 5 9
3
When you hear two short beeps, use the dial pad to press 9 5 4.
4
Enter the new number of the remote fax machine where you want your fax messages forwarded,
and then press # #.
You cannot use
press #. Also, if the machine is connected to a PABX, you can press # first before
the fax machine's number. The # works as well as R key.
5
After you hear the machine beep, hang up.
).
and # as dial numbers. However, if you want to store a pause,
).
and # as dial numbers. However, if you want to store a pause,
Remote Fax Options
53