Copy Quality - Default Settings - Brother MFC-9030 Owner's Manual

Copy Quality – Default Settings
Changing Default Settings
Press Menu/Set, 3 to change default settings for Copy mode. These settings will remain until you
change them again by pressing Menu/Set. Adjust the Copy Mode and Contrast settings.
By pressing a number, you can adjust copy settings as shown in the following chart. Press
to move through the selections for each setting. Press Menu/Set to save your selection. Press
Stop/Exit—OR—Press
Press Menu/Set, and 3.
1.COPY MODE
2.CONTRAST
Copy Mode (Type of Original)
You can select the Copy resolution for your type of original. The default setting is AUTO, which is
used for originals that contain both text and photographs. TEXT is used for originals containing only
text. PHOTO is used for copying photographs.
1
Press Menu/Set, 3, 1.
2
Press or
Menu/Set.
3
Press Stop/Exit—OR—Press
Copy Contrast
You can adjust copy contrast to make copies darker or lighter.
1
Press Menu/Set, 3, 2.
2
Press to make a copy lighter—OR—Press
Menu/Set.
3
Press Stop/Exit—OR—Press
58
Chapter 10
to select the next setting you want to change.
AUTO
TEXT
PHOTO
–
to choose the type of original (AUTO, TEXT or PHOTO), and then press
for additional settings.
for additional settings.
+
to make a copy darker, and then press
or
is default