Brother MFC-9030 Owner's Manual page 151

IMPORTANT
If the socket outlet is not compatible with the mains plug as fitted, then remove the plug from the
mains cord and fit an appropriate three pin plug. If the replacement plug is intended to take a fuse
then fit the same fuse as the original.
If a moulded plug is severed from the power cord then it should be destroyed because a plug with
cut wires is dangerous if plugged into a live socket outlet. Do not leave it where a child might find it.
In the event of replacing the plug fuse, fit a fuse approved by ASTA to BS1362 with the same rating
as the original fuse.
Always replace the fuse cover. Never use a plug with the cover omitted.
WARNING - THIS PRINTER MUST BE PROPERLY EARTHED.
The wires in the mains cord are coloured in accordance with the following code:
Green and yellow:
Blue:
Brown:
142
Chapter 19
Ground
Neutral
Live