Brother MFC-9030 Owner's Manual page 129

ERROR MESSAGE
NO RESPONSE/BUSY The number you called does not
NOT ASSIGNED
OUT OF MEMORY
(When the machine is
used as a printer.)
PAPER JAM
PLS OPEN COVER
TONER EMPTY
120
Chapter 18
CAUSE
answer or is busy. Or, you may have
reached a number that is not
connected to a fax machine.
You tried to access a One Touch or
Speed Dial number that is not
programmed.
The machine memory capacity has
been exceeded.
The recording paper is jammed in the
machine.
A page, piece of paper or paper clip,
etc. may be jammed inside the
machine.
Toner is used up and printing is not
possible, or toner cartridge is not
installed into the drum unit.
ACTION
Check the number and try again.
Set up the One Touch or Speed
Dial number. (See Storing One
Touch Dial Numbers (For FAX-
8070P Only), page 21 and Storing
Speed Dial Numbers, page 22.)
- If you have installed the
®
Windows driver, try again
after setting the True Type
mode to "Print as Graphics" in
the PRINT menu of your
application software.
- Reduce the print resolution or
reduce the complexity of your
document.
See Paper Jam, page 121.
Open the top cover. If you see any
jammed paper or other item, gently
pull it out, then close the top cover.
If the error message remains, open
and close the top cover again.
If the machine cannot reset itself
and return to the date and time
prompt, it will display MACHINE
ERROR XX. Please call your
Brother dealer for service.
Replace the toner cartridge with a
new one, or install the toner
cartridge into the drum unit. (See
Replacing the Toner Cartridge,
page 132.)