Advertisement
27
1
FELIXprinters_gadget.STL
Download testfile
www.FELIXprinters.com/downloads
32a
If print object didn't adhere correctly to the
heated bed, please go to step 23 and 28
Remove object after print completes:
Let bed cool down
Don't vertically pull object away from print
bed.
Start peeling at edges
After peeling edge, try to twist it from bed.
FELIX 3.0 - Quick start guide
Check if settings match
2
from
32b
28
Clean the heated bed with a
detergent like blue spirit or alcohol
Press indicated temperature buttons
Check if temperature is rising.
o If not press this button twice; the printer
might be in standby mode due to long
.
inactivity
32c
Peel edge
29
Wait until temperature set
points are reached.
Make sure nothing is blocking
any axes
30
Extrude until filament
comes out of nozzle
Note: Only works when
temperature > 150ºC
31
Start
Print
33
Congratulations, you've made
your first print!
Tip: consult the user manual for more detailed
information, and join our user forum to get the
most out of your printer
Page 4 of 4
Insert Filament
Advertisement
