Advertisement
22
Turn spindle by hand
to obtain a minimum
distance of 10mm
NOTE:
This calibration step together with previous
calibration of table are very important for the
following reasons:
Prevents damage to printer
Ensures optimal adhesion of object to print bed.
FELIX 3.0 - Quick start guide
23
Home Z
Press
24a
24b
Too far:
Big gap
Too close:
Nozzle hits table
26
1. Move whole
2.Turn screw for
bracket for rough
fine adjustment
adjustment
Page 3 of 4
Calibration
No air gap
Successful
No contact
between nozzle
and table
NOTE:
Lowering the switching vane means
that the print bed will stop further
away from the nozzle tip.
Advertisement
