Kenwood KHC29 Instructions Manual page 14

O Batter Mixes - add the flour to the bowl first, then
liquid and mix on minimum speed to incorporate
the ingredients.
Electronic Speed Sensor Control
Your mixer is fitted with an electronic speed sensor
control that is designed to maintain the speed under
Points to note:
O Never exceed the maximum capacities
stated – you may overload the machine.
Some movement of the mixer head is
O
normal when mixing heavy loads such as
bread dough.
O If the mixer head is raised during operation,
the machine will continue to operate.
Always switch off before raising the head.
O The machine will not operate unless all the
outlet covers are correctly fitted.
O If you hear the machine labouring either
switch off and remove some of the mixture
or increase the speed.
O Your mixer has been fitted with a 'soft
start' feature to minimise spillage.
However if the machine is switched on
with a heavy mixture in the bowl such as
bread dough, you may notice that the
mixer takes a few seconds to reach the
selected speed.
O Always remove attachments fitted to the
outlets before raising the mixer head.
different load conditions, such as when
kneading bread dough or when eggs are added
to a cake mix.
You may therefore hear some variation in
speed during the operation as the mixer
adjusts to the load and speed selected - this is
normal.
To Use your Attachments
Refer to the relevant illustrations for each attachment
and see hint and tips under each attachment section.
Plastic Blender
15
a
b
d
Glass Blender
16
a b
Blade holder Blade unit
c d
Sealing ring Goblet
f
Filler cap
Assemble the Blender as shown In
illustration
Note: ensure the sealing ring is fitted correctly or leaking
will occur.
Plastic blender – turn clockwise to lock.
15
Glass blender – push down to secure.
16
8
Blade unit
Sealing ring
c
Goblet
e
Filler cap Lid
e
Lid
15 16
and
Lid Fitting