Sony SAT-HD300 Operating Instructions (primary manual) Operating Instructions Manual page 89

Digital satellite receiver/recorder: high definition satellite receiver
Hide thumbs Also See for SAT-HD300 Operating Instructions (primary manual):
Table of Contents

Advertisement

8-12. Setting the Audio
Dolby Digital
®
Audio
Allows you to choose a Dolby Digital
®
audio mode according to which analog audio output
port you use to adjust the adequate audio level. If you connect audio line output to your TV,
select 'Line Mode'. If you use the OUT TO TV port to connect to your TV, select 'RF Mode'.
To set the Dolby Digital
1. Press the MENU button on the Remote Control to display the on-screen menu.
2. Scroll down using "
" on the remote control.
E
3. Select the Audio menu by pressing " ".
4. Scroll down to Dolby Digital using "
E
".
5. Move the highlight to the right with "
G
".
6. Select the Line Mode or RF Mode option and press " " to return to the previous level.
7. Press the EXIT button on the remote control to return to TV viewing.
88

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents