Setting A Timer/Record Event - Sony SAT-HD300 Operating Instructions (primary manual) Operating Instructions Manual

8-5. Setting a Timer/Record Event

Allows you to set up a timer or record event manually. You can see the event list in the
Timer/Record List menu (DIRECTV
Timer/Record event in the Guide (see section 7-6).
A Timer event will automatically tune to the selected channel at the selected time. A
Record event will also turn on the DIRECTV
matically control your VCR to record the program if the VCR Controller is correctly set up
(see sections 3-6 and 8-23).
To add a program to the Timer/Record List
1. Press the MENU button on the Remote Control to display the on-screen menu.
2. Select the DIRECTV
3. Scroll down to the Timer/Record menu using "
4. Press " G " or " ". The pop-up dialogue box will be displayed.
5. Select a Type option, either Timer or Record.
Then select a Channel, Date, Time, Duration and Repeat options.
6. Pressing " " will show the confirm dialogue box. Press " " again.
7. After adding a program, you can check the new item in the Timer/Record List (see next page
'8-6. Modifying a Timer/Record Event'. )
8. Press MENU button to return to the previous level or press the EXIT button on the remote
control if you want to return to TV viewing.
Timer/Record List). You can also set a one time
® HD Receiver if it is turned off and will auto-
® menu by pressing " " on the remote control.
E ".
66