Sony SAT-HD300 Operating Instructions (primary manual) Operating Instructions Manual page 78

8. CUSTOMIZATION
8-8. Managing Channels
Manual Ch. Add
Manually adds a channel to your channel list without rescanning all the channels again.
Auto Program may not pick up every channel that is available on Air and Cable. Therefore, it
may be necessary for you to add channels manually using this feature.
Note :The Manual Channel Add feature is not available in ANT/CABLE mode. Use the Auto
Program and Favorite/Ch Edit menus to add channels in the ANT/CABLE mode.
To add the channels missed in your channel list:
1. Press the MENU button on the remote control to display the on-screen menu.
2. Scroll down using "
3. Select the Setup menu by pressing " ".
4. Scroll down to Manual Ch. Add using "
5. Move the highlight to the right with "
6. Enter the channel number desired using the digit buttons on the remote control.
7. Press " " and the pop-up box of the result will be displayed.
8. Press the EXIT button on the remote control to return to TV viewing.
Note : Over-the-air local digital channels (ATSC) may have different channel assignments
than their analog (NTSC) broadcast counterparts.
77
" on the remote control.
E
E ".
G " to display the channel add box.