Sony SAT-HD300 Operating Instructions (primary manual) Operating Instructions Manual page 87

8-12. Setting the Audio
Audio Mode
Allows you to choose the default audio mode when a program is broadcasting in analog
format.
When you view a program broadcast in mono, you will hear only mono sound, even though
stereo mode is set. When Second Audio Program "SAP" mode is set, the program's sec-
ond audio program is broadcast in mono, if provided.
To Set the Analog Audio Mode:
1. Press the MENU button on the Remote Control to display the on-screen menu.
2. Scroll down using " E " on the remote control.
3. Select the Audio menu by pressing " ".
4. Scroll down to Audio Mode using " ".
E
5. Move the highlight to the right with " ".
G
6. Select one of the three options and press " " to return to the previous level.
7. Press the EXIT button on the remote control to return to TV viewing.
86