Sony SAT-HD300 Operating Instructions (primary manual) Operating Instructions Manual page 31

3-5. TV Connection - HD Monitor (DVI-HDTV type)
Antenna
Cable TV
wall jack
ANT IN
CABLE IN
OUT TO TV
TV Viewing
1. Connect the "OUT TO TV" jack on the DIRECTV
RF cable.
2. Connect the "DVI-HDTV OUT" jack on the DIRECTV HD Receiver to the "DVI-HDTV IN" jack of your TV using
DVI -type connector. (The "TYPE" switch must be set toward the "RGB/DVI-HDTV" jacks.)
3. Connect the L/R "AUDIO OUT" jacks on the DIRECTV HD Receiver to the L/R "AUDIO IN" jacks on your TV using
RCA-type cables.
Note: For best access to high-definition programming from DIRECTV, connect the DVI-HDTV output to a
DVI-HDTV input on your high-definition TV or monitor. A DVI-HDTV input is one that is compliant with
EIA-861 and HDCP specifications. Check your TV or monitor's user manual to find out if the TV or moni-
tor's DVI input is compliant with these specifications.
HD-Ready TV
ANT.IN L R
COMPONENT OUT
VIDEO OUT
(1080i i /720p/480p/480i i )
1 2
Y
DIGITAL
AUDIO
S VIDEO
OUT
OUT
Pb
L1 L2
TYPE
Pr
R1 R2
OPTICAL
AUDIO OUT
® HD Receiver to the "ANT IN" jack on your TV using a coaxial
LNB LNB
Sat A Sat C
DVI-HDTV IN
DATA PORT
RF
REMOTE
RGB OUT
DVI-HDTV OUT
VCR
CONTROL
(1080i/720p/480p) (1080i/720p/480p) (1080i i /720p/480p/480i i )
Phone wall jack
LNB
Sat B
Dish
5x4 Multi-switch
Output
SATELLITE
PHONE IN
JACK
30