Product Specifications - Sony SAT-HD300 Operating Instructions (primary manual) Operating Instructions Manual

PRODUCT SPECIFICATIONS

Television System
Channel Coverage
Digital TV
VHF
UHF
CATV
DIRECTV
Inputs/Outputs
ATSC/NTSC RF Inputs
RF Output
DIRECTV RF Input
DVI-HDTV Output
RGB Output
Component Video Output
S-Video Output
Video Output
Digital Audio
Analog Audio
Access Card
Data Port
VCR Control
RF Remote
Supplied Accessories
Remote Control
Batteries
Cables
Dimension
Mass
Power Requirements
Power Consumption
Design and specifications are subject to change without notice.
117
NTSC, Analog American Standard (480i)
ATSC, Digital TV standard (1080i, 720p, 480p, 480i)
DIRECTV
1-69
2-13
14-69
1-125
variable
Antenna (1), Cable TV (1) (Terrestrial)
Out To TV (1) (selectable Channel 3 or 4)
Satellite In (1)
DVI-HDTV Out (1), DVI-D Single Link connector
1080i, 720p, 480p, 480i digital RGB
EIA-861 Compliant, HDCP 1.0 Compliant
15-pin Connector (1)
1080i, 720p, 480p RGB
Component Out (1), Phono Jack connector
1080i, 720p, 480p, 480i YPbPr
S-Video Out (1), 4-pin Mini-DIN
480i Y/C
Video Out (2), Phono Jack connector
480i Composite NTSC
Optical (selectable Dolby Digital
Audio Out (2) (Fixed Output Level)
Smart Card (Slot on the front)
9-pin Serial Port (1)
IR blaster (1)
RF Remote Controller (1)
RM-Y822
AA type Batteries (2)
DVI-D Single Link Cable (1)
Component Cable (1)
S-Video Cable (1)
Audio/Video Cable (1)
RF Cable (1)
Telephone Cable (1)
VCR Controller (1)
Remote Control RF Antenna (1)
430mm (W) x 69mm (H) x 326mm (D) (Excluding Feet)
3.84kg
AC 120V, 60Hz
40W (Maximum)
20W (Standby: Single LNB)
® audio or PCM output)