Saeco Lavazza Omnia 120V Operation And Maintenance page 78

US English
Pour 250 ml / 8 oz descaler and 750 ml / 25 oz water into
the water tank. Select "OK" and press the "OK" button.
The following screen is displayed:
The first descaling phase starts. Press the "OK" button to
pause the cycle. Press the "OK" button again to resume
the cycle. When the solution in the tank is finished, the
machine requests to empty and rinse the tank with fresh
drinking water.
Rinse the water tank thoroughly and fill it with fresh
drinking water up to the MAX level. Press the "OK"
button. The following screen is displayed:
Remove and empty the drip tray. After emptying it, put
the drip tray back into place. Press the "OK" button.
The following screen is displayed:
78
Check that the Cappuccinatore is correctly positioned.
Press the "OK" button. The following screen is displayed:
Place a large container under the dispensing spouts (hot
water, coffee and cappuccino). Press the "OK" button. The
following screen is displayed:
Press the "OK" button to pause the cycle. Press the "OK"
button again to resume the cycle. Once the cycle ends, the
screen below appears:
Re-fit the small white filter. Fill the water tank again up to
the MAX level with fresh drinking water.