Adjusting The Coffee Dispensing Spout - Saeco Lavazza Omnia 120V Operation And Maintenance

US English
Remove the water filter. Follow the steps indicated in the
"Preparing and installing the water filter" section. The
operations relating to the descaling phase are not
required. You just need to replace the filter and activate
the new one. The display automatically updates the
number of filters used. Fill the water tank again up to the
MAX level with fresh drinking water.
Replacing the filter after using 8 filters
Remove the water filter. Follow the steps indicated in the
"Preparing and installing the water filter" section. All
operations relating to the descaling phase are required.
The display automatically updates the number of filters
used. Fill the water tank again up to the MAX level with
fresh drinking water.
7.3.3 Water filter removal
If the filter is installed in the machine and you want to
remove it, follow the steps below.
Remove the water filter. Descale the machine as described
in the "Descaling" section. You do not need to remove the
small white filter, since it was removed previously. Once
descaled, the machine requests you to press a button.
Pressing the button, this screen appears:
Select "NO" and press the "OK" button. Exit the
programming mode.
Re-fit the small white filter. Fill the water tank again up to
the MAX level with fresh drinking water.
30
7.4 Adjusting the Coffee
Dispensing Spout
Most of the cups and mugs available on the market can be
used with this coffee machine. Raise or lower the middle
grill to adjust.
The recommended positions are:
• When using small cups.
• When using large cups and/or Latte Macchiato cups.