Saeco Lavazza Omnia 120V Operation And Maintenance page 29

The following screen is displayed:
In case machine descaling is not necessary or when
replacing one of the 8 filters, the activation procedure
starts from this point.
Select "YES" and press the "OK" button. The following
screen is displayed:
Put the filter into the empty tank. Press it to its limit stop.
Fill the water tank again up to the MAX level with fresh
drinking water. Select "OK" and press the "OK" button.
The following screen is displayed:
Place a container under the hot water spout. Select "OK"
and press the "OK" button. The filter activates. The
following screen is displayed:
Press the "OK" button to pause the operation. Once the
cycle ends, the menu is exited. Fill the water tank again up
to the MAX level with fresh drinking water. On the ready
machine screen, the water filter icon appears with the
100% percentage to indicate that the filter has been
installed.
7.3.2 Replacing the water filter
Replace the water filter as
soon as the capacity drops
to 0% and the filter icon
starts blinking quickly.
Replace the water filter at
least every 3 months, even
if the machine has not
indicated
replacement.
US English
its need for
29