Saeco Lavazza Omnia 120V Operation And Maintenance page 25

Measuring water hardness
is very important in order
to correctly manage the
anti-scale filter and the
frequency with which the
machine must be descaled.
The machine must be fully
free of limescale before
starting to use the water
filter.
If the filter
activated on the first use
and more than 50 cups
were brewed (with a 100
ml / 3.4 oz capacity), the
machine must be descaled
before activating the filter.
Replace the water filter as
soon as the capacity drops
to 0% and the filter icon
starts blinking
Replace the water filter at
least every 3 months, even
if the machine has not
indicated its
replacement.
was not
7.3.1
The water filter can be fitted on first installation as part of
the installation procedure. If you failed to fit the water
filter on first use, you can install it at a later stage by
accessing the menu as described below. Remove the water
filter from the package. The filter should be set according
to the measurements performed to set water hardness.
Use the water hardness test strip (not provided).
quickly.
need for
We recommend buying a
new filter when its capacity
drops to 10% and the filter
icon starts blinking slowly.
In this way you can replace
the filter when its capacity
drops to 0%.
The anti-scale filter should
be replaced
indicated by the machine.
Before descaling, remove
the anti-scale filter from
the water tank.
Preparing and installing the
water filter
US English
whenever
25