Saeco Lavazza Omnia 120V Operation And Maintenance page 48

US English
MENU ITEM
Maintenance Menu
Password
Set
Confirm Password
Disable
Change
User Menu Password
Set
Confirm Password
Disable
Change
Exit
Restore Factory Settings
48
Description
Using this option, the user can manage the Maintenance Menu password
- SET:
you can access this option if the password is not set
- DISABLE:
this option is only displayed if a password is already set
- CHANGE:
Press the OK button on the EXIT option to go back to the top level
This function allows you set the 4-digit code to access the Maintenance menu
The user must set the desired number, increasing or decreasing it by means of the
navigation buttons.
By pressing the OK button the cursor under the digit is moved to the right.
By pressing the OK button, after the fourth digit you access the "Confirm Password"
screen.
Press the OK button on the EXIT option to go back to the top level
Press OK on one of the following options:
- YES:
confirm and save the set credits
- No:
go back to the password entry screen
Press the OK button on the EXIT option to go back to the top level
Using this option, the user can disable the set password:
In this case the password is set to "0000" by default.
Using this option, the user can change the set password:
Using this option, the user can manage the User menu password:
- SET:
you can access this option if the password is not set
- DISABLE:
this option is only displayed if a password is already set
- CHANGE:
Press the OK button on the EXIT option to go back to the top level
This function allows you set the 4-digit code to access the User menu
The user must set the desired number, increasing or decreasing it by means of the navigation
buttons.
By pressing the OK button the cursor under the digit is moved to the right.
By pressing the OK button, after the fourth digit you access the "Confirm Password" screen.
Press the OK button on the EXIT option to go back to the top level
Press OK on one of the following options:
- YES:
confirm and save the set credits
- No:
go back to the password entry screen
Press the OK button on the EXIT option to go back to the top level
Using this option, the user can disable the set password:
In this case the password is set to "0000" by default.
Using this option, the user can change the set password:
This option allows the user to go back to the menu top level
This function restores the factory configuration settings when a malfunction occurs.
Using the OK button the user can confirm this selection.