Gamry Instrument Manager - Gamry Instruments Reference 3000 Operator's Manual

The Interface 1000 (IFC 01004) in this system is shown with a green indicator because it is installed and ready
to run. The Reference 600 labeled My Ref600 has a yellow indicator because it is recording the EIS spectrum
shown on the screen. The Reference 600 labeled Jims Ref600 has a white indicator, showing it is plugged in
but cannot be used. This is an indication of obsolete firmware.
Though no Reference 3000 was used in this example, its status indicator behaves in the same manner
described above.

Gamry Instrument Manager

Use Gamry's Instrument Manager dialog box to make changes to the configuration of your Reference 3000
system. Get access to this dialog box via the Options menu in the Gamry Framework.
Use the Instrument Manager to:
Rename potentiostats

Delete potentiostats that are not currently connected to the computer

Select the order in which potentiostats appear in menus

Authorize potentiostat use with applications packages

Update firmware within potentiostats

Run the Instrument Manger by selecting Options>Instrument Manager... on the Framework Menu.
Figure 4-4shows an Instrument Manager dialog box for a two-potentiostat Framework session with a
Reference 600+ and a Reference 3000.
Installation – Gamry Instrument Manager
Framework with Three Potentiostats and One Running Test
Figure 4-3
33