Gamry Instruments Reference 3000 Operator's Manual page 36

3) Click the Update Firmware button.
The Firmware Update window appears.
4) Click the Update button on the type of firmware you wish to update.
You are then prompted for a file. Navigate to the file's location (on the Gamry software disk or on your
computer's hard drive) and then click the Open button. The update procedure begins.
A status bar shows the progress of the update. The USB LED on the Reference 3000 should also turn
red during the procedure.
When the update is successful, click the OK button, and your Reference 3000 is ready for use.
Installation – Firmware Update
36